OziExplorer. Описание программы. Форматы файлов данных OziExplorer

	О полном приводе, дорогах и бездорожье 4X4@aaa13.ru

Вниманию авантюристов - через Хибины на квадроциклах.
Подробности здесь.

Форматы файлов данных OziExplorer

Думается, если сюда кто и полезет, то врядли настолько НЕ владеющий английским техническим. А потому и переводить без смысла.

Waypoint File (.wpt)

Line 1 : File type and version information

Line 2 : Geodetic Datum used for the Lat/Lon positions for each waypoint

Line 3 : Reserved for future use

Line 4 : GPS Symbol set - not used yet

Waypoint data

One line per waypoint
each field separated by a comma
comma's not allowed in text fields, character 209 can be used instead and a comma will be substituted.
non essiential fields need not be entered but comma separators must still be used (example ,,)
defaults will be used for empty fields
Any number of the last fields in a data line need not be included at all not even the commas.

Field 1 : Number - this is the location in the array (max 1000), must be unique, usually start at 1 and increment. Can be set to -1 (minus 1) and the number will be auto generated.
Field 2 : Name - the waypoint name, use the correct length name to suit the GPS type.
Field 3 : Latitude - decimal degrees.
Field 4 : Longitude - decimal degrees.
Field 5 : Date - see Date Format below, if blank a preset date will be used
Field 6 : Symbol - 0 to number of symbols in GPS
Field 7 : Status - always set to 1
Field 8 : Map Display Format
Field 9 : Foreground Color (RGB value)
Field 10 : Background Color (RGB value)
Field 11 : Description (max 40), no commas
Field 12 : Pointer Direction
Field 13 : Garmin Display Format
Field 14 : Proximity Distance - 0 is off any other number is valid
Field 15 : Altitude - in feet (-777 if not valid)
Field 16 : Font Size - in points
Field 17 : Font Style - 0 is normal, 1 is bold.
Field 18 : Symbol Size - 17 is normal size

This is the record structure of a waypoint variable used within OziExplorer

WayPoints = record Name:string[14]; Status:smallint; Symbol:smallint; Longitude:double; Latitude:double; Altitude:single; wpDate:double; MapDisplayFormat:integer; PointerDirection:integer; GarminDisplayFormat:integer; ForeColor:Tcolor; BackColor:Tcolor; ProximityDistance:longint; AlarmMode:integer; Description:string[40]; FontSize:integer; FontStyle:integer; SymbolSize:integer; GpsObject:Tobject; end;

Event File (.evt)

Line 1 : File type and version information

Line 2 : Geodetic Datum used for the Lat/Lon positions for each event

Line 3 : Reserved for future use

Line 4 : Reserved for future use

Event data

One line per event
each field separated by a comma
non essiential fields need not be entered but comma separators must still be used (example ,,)
defaults will be used for empty fields

Field 1 : Number - this is the location in the array (max 1000), must be unique, usually start at 1 and increment.
Field 2 : Latitude - decimal degrees.
Field 3 : Longitude - decimal degrees.
Field 4 : Symbol - 0 to number of symbols in GPS
Field 5 : Map Display Format - not yet used, set to 0
Field 6 : Foreground Color (RGB value)
Field 7 : Background Color (RGB value)
Field 8 : Symbol Size - 17 is normal size

This is the record structure of an event variable used within OziExplorer

Events = record Symbol:smallint; Longitude:double; Latitude:double; ShowFormat:integer; ForeColor:Tcolor; BackColor:Tcolor; SymbolSize:integer; GpsObject:Tobject; end;

Track File (.plt)

Line 1 : File type and version information

Line 2 : Geodetic Datum used for the Lat/Lon positions for each trackpoint

Line 3 : "Altitude is in feet" - just a reminder that the altitude is always stored in feet

Line 4 : Reserved for future use

Line 5 : multiple fields as below
Field 1 : always zero (0)
Field 2 : width of track plot line on screen - 1 or 2 are usually the best
Field 3 : track color (RGB)
Field 4 : track description (no commas allowed)
Field 5 : track skip value - reduces number of track points plotted, usually set to 1
Field 6 : track type - 0 = normal , 10 = closed polygon , 20 = Alarm Zone
Field 7 : track fill style - 0 =bsSolid; 1 =bsClear; 2 =bsBdiagonal; 3 =bsFdiagonal; 4 =bsCross;
5 =bsDiagCross; 6 =bsHorizontal; 7 =bsVertical;
Field 8 : track fill color (RGB)

Line 6 : Number of track points in the track, will be recalculated when reading file

Trackpoint data

One line per trackpoint
each field separated by a comma
non essiential fields need not be entered but comma separators must still be used (example ,,)
defaults will be used for empty fields

Field 1 : Latitude - decimal degrees.
Field 2 : Longitude - decimal degrees.
Field 3 : Code - 0 if normal, 1 if break in track line
Field 4 : Altitude in feet (-777 if not valid)
Field 5 : Date - see Date Format below, if blank a preset date will be used
Field 6 : Date as a string
Field 7 : Time as a string

Note that OziExplorer reads the Date/Time from field 5, the date and time in fields 6 & 7 are ignored.

Example
-27.350436, 153.055540,1,-777,36169.6307194, 09-Jan-99, 3:08:14
-27.348610, 153.055867,0,-777,36169.6307194, 09-Jan-99, 3:08:14

This is the record structure of an trackpoint variable used within OziExplorer

TrackRecord = record Latitude:double; Longitude:double; Code:integer; Altitude:integer; Date1:TDateTime; GpsObject:Tobject; end;

Point File (.pnt)

Line 1 : File type and version information

Line 2 : Geodetic Datum used for the Lat/Lon positions for each point

Line 3 : Reserved for future use

Line 4 : Reserved for future use

Line 5 : multiple fields as below
Field 1 : point set fore color (RGB)
Field 2 : point set back color (RGB)
Field 3 : point set size
Field 4 : point set font size
Field 5 : point set format
Field 6 : point set style
Field 7 : point set description (no commas)

Point data

One line per point
each field separated by a comma
non essiential fields need not be entered but comma separators must still be used (example ,,)
defaults will be used for empty fields

Field 1 : Latitude - decimal degrees.
Field 2 : Longitude - decimal degrees.
Field 3 : rotation angle
Field 4 : point name
Field 5 : description 1 (no commas)
Field 6 : description 2 (no commas)
Field 7 : description 3 (no commas)

Route File (.rte)

Line 1 : File type and version information

Line 2 : Geodetic Datum used for the Lat/Lon positions for each waypoint in the routes

Line 3 : Reserved for future use

Line 4 : Reserved for future use

Route data

One line per route followed by each waypoint in the route
each field separated by a comma
comma's not allowed in text fields, character 209 can be used instead and a comma will be substituted.
non essiential fields need not be entered but comma separators must still be used (example ,,)
defaults will be used for empty fields
Any number of the last fields in a data line need not be included at all not even the commas.

Route Record

Field 1 : R - indicating route details
Field 2 : Number - this is the location in the array, must be unique, usually start at 0 for Garmins 1 for other and increment.
Field 3 : Name - the waypoint name, use the correct length name to suit the GPS type.
Field 4 : Description.
Field 5 : Route Color as displayed on map (RGB).

Route Waypoint Record

Field 1 : W - indicating route waypoint details.
Field 2 : Route Number - location in array of routes
Field 3 : Number - this is the location in the array of route waypoints, this field is now ignored.
Field 4 : Wp Number - this is the number of the waypoint (the Wp number within the GPS for lowrances)
Field 5 : Name - the waypoint name, use the correct length name to suit the GPS type.
Field 6 : Latitude - decimal degrees.
Field 7 : Longitude - decimal degrees.
Field 8 : Date - see Date Format below, if blank a preset date will be used
Field 9 : Symbol - 0 to number of symbols in GPS
Field 10 : Status - always set to 1
Field 11 : Map Display Format
Field 12 : Foreground Color (RGB value)
Field 13 : Background Color (RGB value)
Field 14 : Description (max 40), no commas
Field 15 : Pointer Direction
Field 16 : Garmin Display Format

While all the waypoint details are stored with each route it is always the waypoints loaded on the map which have priority, in other words if a waypoint on the map has the same name and/or array number location as a waypoint in a route loaded from a route file the waypoint on the map could replace the waypoint currently loaded from the route record. This occurs when the user presses the relink waypoints button on the Route Editor.

This is the record structure of a route variable used within OziExplorer

RouteRecord = record Name:string[16]; Description:string[40]; NumOfWp:integer; Wp:array[1..MaxWpRoute] of RouteWpRecord; end;

This is the record structure of a route waypoint variable used within OziExplorer

RouteWpRecord = record WpNumber:integer; WpName:string[14]; Status:smallint; Symbol:smallint; Longitude:double; Latitude:double; wpDate:double; MapDisplayFormat1:integer; PointerDirection:integer; GarminDisplayFormat:integer; ForeColor:Tcolor; BackColor:Tcolor; Description:string[40]; end;

Date Format

Delphi stores date and time values in the TDateTime type. The integral part of a TDateTime value is the number of days that have passed since 12/30/1899. The fractional part of a TDateTime value is the time of day.

Following are some examples of TDateTime values and their corresponding dates and times:

0 - 12/30/1899 12:00 am
2.75 - 1/1/1900 6:00 pm
-1.25 - 12/29/1899 6:00 am
35065 - 1/1/1996 12:00 am

Map File Format

In the text below the lines in the map file are marked with a dot.

The lines in green are optional

The Map File

The lines are in the order they are in the map file.

Header and Version of File

OziExplorer Map Data File Version 2.1

Title of Map - any text string

Brisbane Region AC

Link to map image file

D:\OziMaps\regional\south.ozf2

Redundant - ignore whats in the line but the line must be there

1 TIFF scale factor

Datum settings

WGS 84,, 0.0000, 0.0000,WGS 84

Reserved fields, the lines must be there

Reserved 1
Reserved 2

Magnetic Variation entry - degrees,minutes

Magnetic Variation,,,E

Map Projection

Map Projection,Lambert Conformal Conic,PolyCal,No,AutoCalOnly,No,BSBUseWPX,Yes

Calibration points, there are always 30

Point01,xy, 494, 235,in, deg, 24, 0,S, 148, 0,E, grid, , , ,S
Point02,xy, 4076, 238,in, deg, 24, 0,S, 154, 0,E, grid, , , ,S
Point03,xy, 4011, 2854,in, deg, 28, 0,S, 154, 0,E, grid, , , ,S
Point04,xy, 550, 2851,in, deg, 28, 0,S, 148, 0,E, grid, , , ,S
Point05,xy, , ,in, deg, , ,S, , ,E, grid, , , ,S
Point06,xy, , ,in, deg, , ,S, , ,E, grid, , , ,S
...
Point30,xy, , ,in, deg, , ,N, , ,W, grid, , , ,N

Projection setup parmeters, all on one line.

Projection Setup, 0.000000000, 152.000000000, 1.000000000, 2500000.00, 100000.00, -24.666667000, -27.333333000,,,

A marker line, it contains no information but is used as a file marker, must be there

Map Feature = MF ; Map Comment = MC These follow if they exist

Map Features, there are 3 lines per feature
Line 1 -
Line 2 - the link to the picture, if there is no picture a blank line must be there
Line 3 - the description of the feature, if no description the blank line must be there

MF, 1,MF 1 , -26.557302, 152.679007, 0, 16777215, 16711680, ,1,MF1
c:\pictures\photo5.jpg
This is a good camping spot
MF, 2,MF 7 , -26.713354, 153.249176, 0, 16777215, 16711680,Asterisk.bmp ,1,MF7

Map Comments, there are 2 lines per comment
Line 1 -
Line 2 - The text for the comment

MC, 1, -26.572626, 152.512726, 0, 0, 65280, 68,20,6,0
Map Comment 1
MC, 2, -26.661532, 152.633450, 0, 0, 13158342, 182,82,13,1
Map Comment 2 This is a large map comment
MC, 3, -26.659946, 152.634492, 0, 0, 13158342, 182,82,13,1
Map Comment 3

Attached file marker, .plt, .wpt, .evt, .pnt files can be included

Track File = TF These follow if they exist

The attached files

TF,e:\GpsMap\Data\000_2.plt
TF,e:\GpsMap\Data\aa_demo1.plt
TF,e:\GpsMap\Data\000_test.plt
TF,e:\GpsMap\Data\001_test.plt
TF,e:\GpsMap\Data\aaa.pnt
TF,e:\GpsMap\Data\names.pnt

The Moving Map section marker

Moving Map Parameters = MM? These follow if they exist

Use in Moving Map, if this parameter is set to No then the map will be excluded when looking for a new map to change to when using moving map mode. It does not affect other map find functions.

MM0,Yes

Number of Map border points
Only 4 points can be set graphically in OziExplorer but up to 100 points can be used when derived from other sources, such as importing BSB charts.

MMPNUM,4

The x,y pixel location of each border point, there must be an entry for each border point.
Thes are use by OziExplorer as the map loads to determine the map border points.

MMPXY,1,494,234
MMPXY,2,4076,238
MMPXY,3,4012,2855
MMPXY,4,549,2852

The lat,lon position of each border point, there must be an entry for each border point.
These values are used in the map find and moving map functions when looking for maps.
These values will be overwritten by the calculated value from the above x,y points every time the map is saved.

MMPLL,1, 147.999332, -23.998496
MMPLL,2, 154.000701, -23.999946
MMPLL,3, 154.001025, -28.001546
MMPLL,4, 147.998983, -28.001469

The scale of the image meters/pixel
It is calculated each time OziExplorer is run, the value in the file is used when searching for maps of "more detailed" scale.

MM1B,170.352987

The lat/lon grid setup

LL Grid Setup
LLGRID,No,10 Min,Yes,8421504,255,16711935,10 Min,16777215,8421504,9,1,Yes,x

The Other grid setup

Other Grid Setup
GRGRID,No,10 Km,Yes,255,16711680,10 Km,16711680,16777215,9,1,Yes,Yes,No,x

The position the map will display when it is opened

MOP,Map Open Position,3008,2324

The map image width and height

IWH,Map Image Width/Height,4440,3590

[ содержание ]


Disclaimer:		как известно - сколько людей, столько и мнений, так что применять или не применять тот или иной совет со страниц сайта - Ваша личная ответственность за последствия.
Copyrights:		все авторы и/или владельцы информации указаны в каждом материале. Также указан источник получения информации. Так что при цитировании на страницах других веб-сайтов не лишне будет указывать автора и источник цитирования.